298 found, showing page 19 of 20
Halex 20421 Squeeze Connector, 1/2 in, Zinc-Plated
PRODUCT OVERVIEW
Halex Squeeze Connector, Flexible, 1/2 in Trade, Zinc-Plated
Product Details
Finish:Zinc-Plated
Trade Size:1/2 in
Type:Flexible
View Details
$4.29
Halex 26510 Clamp Connector, 3/8 in, Steel, Electro-Plated Zinc, Snap-In, 5/BAG
PRODUCT OVERVIEW
Halex Clamp Connector, Trade Size: 3/8 in, Steel, Electro-Plated Zinc, Snap-In Mounting, Mounting Hole Diameter: 1/2 in, 1.33 in L, 0.65 in W, 1-1/4 in H, Suitable for: 0.16 to 0.56 in Dia Non-Metallic Cable
Product Details
Finish:Electro-Plated Zinc
Length:1.33
Material:Steel
Mounting Hole Diameter:1/2 in
Mounting Type:Snap-In
Suitable for:0.16 to 0.56 in Dia Non-Metallic Cable
Trade Size:3/8 in
Width:0.65
Features
1/2 in knockout
No locknut is required
View Details
$2.79
Gardner Bender GCC-220 Conduit Strap, 3/4 in, Polyethylene, Gray, 20/PK
PRODUCT OVERVIEW
Securely fasten schedule 40 PVC, copper tubing and other electrical and plumbing cables and pipes with these heavy-duty polyethylene straps. Unlike metal straps these plastic straps won't rust and they offer stability against UV rays and extreme cold while withstanding deterioration and breakage. Easily installed with a hammer or drill.
Product Details
Color:Gray
Height:7.5 in
Material:Polyethylene
Mounting Hole Diameter:1 in
Suitable for:1-1/2 in Conduits Copper and PVC Tubing
Trade Size:3/4 in
Features
Withstands extreme cold and UV rays
Will not corrode like metal straps
Easy to install
Secures up to 1 in and 1/2 in Dia conduit, pipe, tube or bundle
View Details
$5.99
Halex 14605 Pull Elbow, 90 deg Angle, 1/2 in, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Removable steel cover facilitates wire pulling. Use to connect EMT conduit together at an inside corner. UL listed, CSA approved. Tray boxed.
Product Details
Angle:90 deg
Material:Zinc
Trade Size:1/2 in
Features
Removable cover facilitates wire pulling
View Details
$8.69
nVent ERICO 615880A Ground Rod, 5/8 in Dia Nominal, 8 ft L, Copper-Bonded Steel
PRODUCT OVERVIEW
nVent ERICO Ground Rod, Copper-Bonded Steel, Nominal Diameter: 5/8 in, 8 ft L, 80,000 lbf/sq-in Tensile Strength, Additional Information: 10 mil THK Plating
Product Details
Additional Information:10 mil THK Plating
Length:8
Material:Copper-Bonded Steel
Nominal Diameter:5/8 in
Tensile Strength:80000 lbf/sq-in
Features
99.9% pure electrolytic copper coating
Rods have a high-carbon steel core and tip that provide great strength when driving
Copper coating will not crack when bent or tear when driven
Minimum copper coating of 10 mil on rods listed to UL 467
nVent ERICO name, length, diameter and part number is roll-stamped within 12 in (304.8 mm) of chamfered end
UL logo and control number where applicable stamped on each rod for easy inspection after installation
Molecular bond to nickel-sealed high-strength steel core
View Details
$34.45
Halex 04010 Offset Nipple, 1 in, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
Product Details
Material:Zinc
Trade Size:1 in
View Details
$7.99
Halex 75400 Anti-Short Bushing, PVC, Red
PRODUCT OVERVIEW
High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402 fits cable range of 12/4, 10/2, 10/3, 2/1. No 75403 fits cable range of 10/4, 8/2, 8/3, 1/1. No 75404 fits cable range of 8/4, 6/2, 6/3, 4/2, 4/3, 6/4.
Product Details
Color:Red
Material:PVC
Suitable for:10/4 8/2 8/3 1/1 Cable
View Details
$2.99
Halex 90401 Offset Nipple, 1/2 in, Zinc
PRODUCT OVERVIEW
Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.
Product Details
Material:Zinc
Trade Size:1/2 in
Features
Offsets the axis of the raceway by 3/4 in
View Details
$4.29
Halex 07020 Conduit Chase Nipple, 2 in, Zinc
PRODUCT OVERVIEW
Zinc die cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved.
Product Details
Material:Zinc
Trade Size:2 in
View Details
$10.99
Halex 21210 Set Screw Connector, 1/2 in, Zinc, 5/BAG
PRODUCT OVERVIEW
Zinc die-cast. Use to connect EMT conduit to steel outlet box, load center or other metal enclosure. UL approved.
Product Details
Material:Zinc
Trade Size:1/2 in
Features
Concrete tight 1/2 in to 3/4 in, concrete tight when taped 1 to 4 in
View Details
$4.99
Halex 20701 Rigid Conduit Chase Nipple, 1/2 in Threaded, 1.02 in OD, Zinc, 2/BAG
PRODUCT OVERVIEW
Halex Rigid Conduit Chase Nipple, Trade Size: 1/2 in, Threaded Connection, Zinc, 0.68 in L, 1.02 in Dia Outside
Product Details
Connection Type:Threaded
Length:0.68
Material:Zinc
Outside Diameter:1.02 in
Trade Size:1/2 in
Features
Use with a rigid coupling to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited
Used with a locknut to provide a short raceway between boxes or enclosures
View Details
$3.99
Gardner Bender GCC-120 Conduit Strap, 1/2 in, Polyethylene, Gray, 20/PK
PRODUCT OVERVIEW
Securely fasten schedule 40 PVC, copper tubing and other electrical and plumbing cables and pipes with these heavy-duty polyethylene straps. Unlike metal straps these plastic straps won't rust and they offer stability against UV rays and extreme cold while withstanding deterioration and breakage. Easily installed with a hammer or drill.
Product Details
Color:Gray
Height:7.5 in
Material:Polyethylene
Mounting Hole Diameter:7/8 in
Suitable for:1-1/2 in Conduits Copper and PVC Tubing
Trade Size:1/2 in
Features
Withstands extreme cold and UV rays
Will not corrode like metal straps
Easy to install
Secures up to 1 in and 1/2 in Dia conduit, pipe, tube or bundle
View Details
$5.39
Halex 58907 Type LR Rigid Conduit Body, 3/4 in Hub, 5-5/64 in OAL, Threaded, Aluminum, Each
PRODUCT OVERVIEW
Aluminum, indoor or outdoor. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL approved. Tray boxed.
Product Details
Connection Type:Threaded
Hub Size:3/4 in
Material:Aluminum
Overall Height:1-41/64 in
Overall Length:5-5/64 in
Overall Width:1-17/32 in
Suitable for:Rigid Conduit
Type:Type LR
View Details
$8.99
Halex 26162 Conduit Strap, 3/4 in, Steel, Galvanized
PRODUCT OVERVIEW
To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.
Product Details
Finish:Galvanized
Height:6.25 in
Material:Steel
Thickness:5/8 in
Trade Size:3/4 in
Width:2-1/8 in
View Details
$8.69
Halex 96843 Rigid Reducing Washer, 1-1/4 x 1 in, 1.37 in ID, 2.18 in OD, Steel, 2/BAG
PRODUCT OVERVIEW
Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.
Product Details
Inside Diameter:1.37 in
Material:Steel
Outside Diameter:2.18 in
Trade Size:1-1/4 x 1 in
View Details
$1.39
